Addicore nRF24L01+ Wireless AddiKit with Socket Adapter Boards and Jumper Wires

$9.95

$9.95
(SAVE Now!)

as of 03/29/2024 (Details)


Product Contents: • 2 ea nRF24L01+ modules with pins protected in pink anti-static foam • 2 ea nRF24L01+ socket adapter with on-board 3.3V regulator with pins protected in pink anti-static foam • 16 ea male-female jumper wires (8 different colors, 2 wires per color) • All of the above comes in an Addicore reusable AddiKit box Specifications: • nRF24L01+ modules connect easily to Arduino with included nRF24L01+ socket adapters and male-female jumper wires • The nRF24L01+ module is a 3.3V power device but by using one of the included socket adapters you can connect voltages from 4.75V to 12V to the socket adapter, which will supply 3.3V regulated power to the attached nRF24L01+ • Compatible with Raspberry Pi if you use female-female jumper wires • nRF24L01+ is a 2.4GHz ISM band transceiver • nRF24L01+ Includes on-board support components and a 2.4GHz antenna for easy implementation into designs without additional hardware • Communication range up to 262 feet (80 meters) in ideal conditions • nRF24L01+ socket adapters include small power-on SMD LED indicator • A host microcontroller can communicate and configure the nRF24L01+ over a 4-pin Serial Peripheral Interface (SPI); configurable parameters include frequency channel (125 selectable channels), output power, and data rate (data rates: 250kbps, 1Mbps, and 2Mbps) • The module has 5V tolerant inputs which allows for direct connection of SPI pins to the Arduino • The module's radio uses Gaussian Frequency-Shift Keying (GFSK) modulation as well as fast Automatic Gain Control (AGC) • The module includes an Interrupt Request (IRQ) pin which can be used to wake the host microcontroller (ex: Arduino) from sleep when the module receives a transmission providing great power conservation in battery devices • Auto-acknowledge and auto-retransmit

Technical Details

  • Includes 2 nRF24L01+ modules in pink anti-static foam, 2 nRF24L01+ socket adapters with on-board 3.3V regulator with pins in pink anti-static foam, and 16 male-female jumper wires (8 different colors, 2 wires per color)
  • Arduino Compatible
  • Includes link to getting-started guide, data sheet, and other resources
  • Auto-acknowledge and auto-retransmit
  • Possible Applications: wireless peripherals, remote control systems such as RC vehicles and consumer remote electronics, wireless voice transmission such as VoIP, wireless sensor networks, wireless networks, home and commercial automation

Learn more

Deals