as of 08/19/2022 (Details)
Dc Voltage: 12V Rated Current: 12.5A Current Range: 0-12.5A Rated Power: 150W Ripple&Noise(Max): 200mV Setup,Rise Time: 100ms/110VAC Hold Up Time: 80ms/110VAC Frequency Range: 47~60Hz Voltage Range: 90~130VAC Power Factor(Typ): PF>0.5 Efficiency(Typ): 80% Safety Standards: CE Mark(LVD),IP67 Storage Temp Humidity: -40~ +80℃、10~90%RH Working Temp: -30~ +60¡æ(Refer to output load derating curve) Working Humidity: 20~90%RH no-condensing (Waterproof) Emc Test Standards: EN 55015:2006; EN 61547:1995+A1:2000 ;EN 61000-3-2:2006; EN61000-3-2:1995+A2:2005 EN 61347-1：2008 EN 61347-2-13：2006 NOTE: 1. All parameters NOT specially mentioned are measured at 220VAC input, rated load and 25℃ of ambient temperature. 2. Ripple&Noise are measured at 20MHz of bandwidth by using a12'' twisted pair-wire terminated with a 0.1uf 10uf parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation.
- Output Voltage: DC 12V;Ac90-130V input,Rated Power:150W. Using percentage of power supply is 80%, i.e the power of load is 120 watt, you should choose 150W output transformer, otherwise there is possibility to cause the earlier invalidation by person.
- Shell Material: Aluminum Alloy; Main Color: silver white; 2 outputs, AC lead wire be WITHOUT plug, When you connect, keep 2 blue cable together and 2 brown cable wrapped together to load.
- Automatic protection for: short circuit / overload / over voltage / high temp
- Wiring instruction for DC output: Please make the 2 outputs be joint to load while the load over 100W, this way be good for transformer's life span. Load's wattage not over 80% of rated power to be ideal performance.
- The transformer be designed in constant voltage, warranty be invalid if using for lamp which designed constant current solution. CE RoHS certification, one year warranty.