as of 01/25/2022 (Details)
Remove clutter in your installations, replace up to 12 individual power over ethernet injectors with this single gigabit POE module. Rack Mounted PoE injector Extend power to 328 ft or 100 meters This device offers * 12 shielded RJ45 jacks with Data + Power out * power per port limited to 650 ma x 2 * 12 shielded RJ45 jacks Data in - connect to your switch * 2x 2.1mm x 5.5mm DC power jacks - primary and secondary DC power * LED power status * LED power usage status per 4 ports * 10/100/1000 operation * 48v 120watt power supply, 100-240v, 50/60 hz * add a 2nd power supply for redundancy * we offer 7 different power supply options Used to provide PoE power to: * IP phones like Polycom, Cisco, Yealink * WiFi Access points * IP Cameras * 802.3af devices These devices provide power on the data lines 1 and 2, and 3 and 6. This is 802.3af mode A. All devices receive the same voltage - choose a power supply with more available power than the total all devices. Check device specs for power needs, it is under 4 watts for most Phones, other devices need more We offer 18v, 24v and 48v supplies, with 60 and 120 watt versions, also 6 port versions. LED status show power for all 12 port, and for each group of 4. For each group of 4 port an LED indicates: Port current 0 to 20ma = LED off Port current 20 to 400ma = LED is green Port current >400ma = LED is red Full data sheets, manuals online, with expert tech support from Austin. Uses a 2.1mm x 5.5mm DC connector times 2, connect 2 power supplies for redundant operation. We also stock 12v to 48v power supplies, and lower cost 100mb versions.
- Gigabit Power over Ethernet injector, 1U rack mount with 120 watt 48 volt power supply
- power 12 IP Phones, Access Points or IP Cameras - with 802.3af
- add PoE to any switch or router, add a 2nd supply for redundancy or higher capacity
- click on "WiFi-Texas com inc" to see versions with 24v power supplies or 60 watts
- Tech support - ask if you have any questions 512 479 0317