$35.99
$35.99
(SAVE Now!)
as of 04/27/2024 (Details)
Specification: Voltage & Wattage:12V Color: white & red Package Included: 1 pair of LED trailer tail lights 2 side lights 1 bracket 1x harness Includes mounting hardware Right Tail Light have 16LEDS : 12 rear facing large LEDs and 4 SMD LED-on Side Marker Left Tail Light have 19LEDS : 12 rear facing large LEDs ,4 SMD LED-on Side Marker and 3 white LEDs facing down(For license Plate illumination) Connect the BROWN wire to the towing vehicle's Tail light wire Connect the YELLOW wire to the towing vehicle's Left Stop & Turn light Connect the GREEN wire to the towing vehicle's Right Stop & Turn light Attach the WHITE GROUND wire to the towing vehicle's frame Completely sealed for a long corrosion-resistant 1.The trailer light screw nut is made of 304 stainless steel which greatly improves the anti-rust performance. 2.The lens and housing of the trailer light are ultrasonically welded to to block water out and allow the trailer go to the water for a short time,ensure the circuits are protected. Premium Quality Material: - Each Trailer light has passed 3-4 atmospheric pressure waterproof vacuum test. - Each batch of trailer lights passed the test of 2 Hz-600 Hz destructive vibration machine. Cost effective and flexible light alternative: - Outfitted for trailers measuring up to 80 inches wide. - LED lights last 30-40 times longer than standard incandescent bulbs. - Replace your bulbs less often and maneuver your trailer with confidence.
Technical Details
- 【High Visibility LED】- High Brightness LED Combination tail lights last longer than standard incandescent lights.And trailer light kit uses less energy than traditional standard incandescent lights. 625 lumens of light providing Super bright illumination,no glare, NOT incandescent Bulb!
- 【Completely Sealed and IP65 Waterproof】- Submersible Led Trailer Lights's lens and housing use Ultrasonic Welding Technology to achieve IP67 Waterproof, the inside of housing and LEDs , harness and PCB with enough waterproof glue to prevent water into.Complies with DOT standards.
- 【High Power Clean Flux Led Trailer Tail Lights Kit】- Right Tail Light have 16LEDS SMD 5050 lamp beads : 12 rear facing large LEDs and 4 SMD LED-on Side Marker . Left Tail Light have 19LEDS : 12 rear facing large LEDs ,4 SMD LED-on Side Marker and 3 white LEDs facing down(For license Plate illumination)
- 【Detailed Installation Instructions】 - With 22ft length wire harness that it is long enough to reach end of trailer, connect the BROWN wire to the towing vehicle's Tail light wire. Connect the YELLOW wire to the towing vehicle's Left Stop & Turn light . Connect the GREEN wire to the towing vehicle's Right Stop & Turn light . Attach the WHITE GROUND wire to the towing vehicle's frame.
- 【Widely Application + DOT Certification】- The 12V LED trailer lights are designed for Applications under 80 Inch width towing vehicle, like truck, trailer, boat, bus, Lorry, Van, caravan, snowmobile, etc. Our Lights are 100% compliant with DOT certified, this ensures that your lights are federally compliant.